FALCON F
+ USER MANUAL
DCI DigiGuide 10.31.2022
DIGITAL CONTROL, INC 28
The "Li/
V Only" warning appears if you are not using the
recommended Lithium rechargeable or SuperCell battery and
have selected a High power mode.
If you are using a V
transmitter, a warning reminds you that it
only uses Standard power mode.
STEP 6 OF 6
To pair any other time, from
the
Main
menu select
Transmitter selection.
Frequency optimization
,
and continue.
CALIBRATE INTRO
Calibration is required anytime you perform a new frequency scan with
power change or change any of the following:
Transmitter
Power mode of the transmitter
Locator
Drill head
Calibrate both bands with the transmitter in the housing (
fl
at on the ground)
in a low-noise, metal-free environment immediately after pairing.
To calibrate any other time, from the
Main
menu select
To Next Page
Loading...