FALCON F
+ USER MANUAL
DCI DigiGuide 10.31.2022
DIGITAL CONTROL, INC 33
For accurate calibration, always use the center of the
transmitter, not the drill head.
STEP 4 OF 8
Select
Continue
to
calibrate the Down band.
STEP 5 OF 8
The locator beeps three
times and displays a check
mark after a successful
calibration.
STEP 6 OF 8
Use the
Above Ground Range (AGR)
that displays next to check the
accuracy of your calibration. Move the locator to at least two di
ff
erent
distances
.
m and
.
m and verify distance readings match the
measurement.
To Next Page
Loading...