Falcon F2+ - Calibrate - Down

FALCON F  + USER MANUAL
DCI DigiGuide 10.31.2022
DIGITAL CONTROL, INC 32
INV and INVALID are replaced with the signal strength and the
date/time stamp.
On the Locate Mode screen verify that you see the clock, pitch, and signal
strength.
The triangle in the roll
indicator shows calibration
is needed.
CALIBRATE - DOWN
STEP 1 OF 8
From the Main menu, select
Calibration .
STEP 2 OF 8
Use 1 PT Cal to calibrate.
STEP 3 OF 8
Using a tape measure, place the near edge of the locator parallel to and
exactly 3 m from the center of the transmitter .