FALCON F
+ USER MANUAL
DCI DigiGuide 10.31.2022
DIGITAL CONTROL, INC 55
To use di
ff
erent scans for the Up and Down bands, you must
pair the
fi
rst band before scanning for a second band.
STEP 2 OF 10
Ensure all transmitters are powered o
ff
or more than 30.5 m away from the
locator.
STEP 3 OF 10
From the
Main
menu select
Transmitter options
.
STEP 4 OF 10
Frequency optimization
,
and continue.
STEP 5 OF 10
Click the arrow to start the
scan.
STEP 6 OF 10
When the noise bars appear,
walk the intended drill path
to
fi
nd the two locations
with the highest levels of
noise, then return to one of
those locations and scan
again.
To Next Page
Loading...