FALCON F
+ USER MANUAL
DCI DigiGuide 10.31.2022
DIGITAL CONTROL, INC 65
Falcon locators with programmable power mode override any
other selection method when used with a V
transmitter. Use
the locator to change the power mode.
STEP 5 OF 9
Toggle to the band (Up or Down) that you want to change, and then click to
select.
STEP 6 OF 9
Toggle up or down to toggle through the High, Standard, and Low power
modes, and then click to select the new power level.
For High power mode, Lithium-ion batteries are required.
To Next Page
Loading...