For V
transmitters and FTR transmitters, high power is ignored
and the transmitter will pair at Standard power.
STEP 7 OF 9
Select
OK
.
STEP 8 OF 9
Select
Transmitter Pairing
Request.
STEP 9 OF 9
Continue to pair and then calibrate the transmitter.
For step-by-step instructions, see the articles, "Advanced FO - Pair" and
"Calibrate Intro" in the Jobsite Setup chapter.
After changing the power level, you must re-pair the
transmitter and then perform a 1 PT Calibration for each band
changed. For step-by-step instructions, see the articles
"Advanced FO - Pair" and "Calibrate Intro" in the Jobsite Setup
chapter.
FALCON TRANSMITTER ADAPTER FOR V
MULTIPOWER "BLUE"
TRANSMITTERS
To Next Page
Loading...