Falconeyes SS-D Series

To Next Page

Thank you for purchasing FalconEyes’ products.

For further details of our related products, please contact your

local distributor or visit our webpage at www.falconeyes.com.hk

Thank you.

Please read this manual carefully before using this product.

FM1109_SS-D_eng

Attentions

1 Please keep the environment dry and ventilated when using. Do

not leave and use the flash in humid or dusty environment.

Do not remove the fluorescent tube until the light is switched off

for at least 10 minutes in order to avoid scald.

Avoid strong light directing to the photo sensor.

Power must be switched off after use.

SS-D series Studio Flash

2. To prolong the lifespan of the flash, please keep it from crashing or

vibration especially when flashing. Otherwise, flash tube can be

damaged or lifespan of flash shortened.

3. Heating of flash head occurs when flashing. Do not touch the heated

parts with bare hands.

5. There is high voltage inside the unit. Non-professionals should never

dismantle the device. Please contact experienced technicians for repair.

Need help?

Do you have a question about the Falconeyes SS-D Series and is the answer not in the manual?

Summary

Safety and Usage Precautions

Environment Conditions

Keep the environment dry and ventilated, avoid humid or dusty conditions.

Handling and Longevity

Prevent crashing or vibration to prolong lifespan and protect flash tube.

Hot Surfaces Warning

Do not touch heated flash head parts with bare hands.

Tube Removal Safety

Wait 10 mins after switching off before removing fluorescent tube.

Internal Voltage Hazard

High voltage inside; non-professionals should not dismantle.

Sensor Light Avoidance

Avoid directing strong light towards the photo sensor.

Power Off After Use

Ensure the power is switched off after use.

Product Features

Control Panel Overview

Photo Sensor

Identifies the photo sensor component.

Variable Power Dial

Adjusts flash power output.

Modeling Lamp ON;OFF Button

Controls the modeling lamp.

Main Power Switch

Turns the unit on/off.

Sync Socket

Port for external flash synchronization.

Charging Indicator Light

Indicates charging status.

Photo Sensor On;Off Switch

Activates or deactivates the photo sensor.

Test Button

Fires a test flash.

Beeper Switch

Controls audible beeps.

Fuse

Protective electrical component.

Power Socket

Connection for power cable.

Accessories List

Power Cable

Cable for powering the device.

Sync Cord

Cord for flash synchronization.

Fuse

Replacement fuse.

Instruction Manual

User manual for the product.

Modeling Lamp

Replacement modeling lamp.