Faller 140445 User Manual

Sa. Nr. 225 560 1
KIRMESBUDE »MEER-FISCH«
»SEA FISH« FAIRGROUND BOOTH
STAND FORAIN »POISSONS DE MER«
KERMISKRAAM »ZEEVIS«
Art. Nr. 140445
Vor Beginn des Bastelns sollten Sie sich mit den Spritzlingen und der Anleitung vertraut machen.
Sollte es einmal vorkommen, dass ein Teil im Bausatz fehlt, kreuzen Sie bitte das fehlende Teil in
der Anleitung an und schicken Sie diese bitte an Fa. Gebr. FALLER GmbH, Abt. Kundendienst,
kundendienst@faller.de, Kreuzstraße 9, 78148 Gütenbach. Sie erhalten dann umgehend Ersatz.
In diesem Bausatz sind einige Kunststoffteile übrig.
Before beginning with the assembly please familiarize yourself with the parts and read the instructions carefully.
In case of missing parts please indicate these on the instructions leaflet with a circle and return
the leaflet to Gebr. FALLER GmbH, kundendienst@faller.de, Kreuzstraße 9, D-78148 Gütenbach, Germany.
You will receive the replacement by return.
Some of the parts in this box are not needed to construct the model.
Avant de commencer le montage de votre maquette bien lire la notice et repérer les grappes.
Si une pièce manque dans une boîte, cochez la pièce correspondante sur la notice et renvoyez-la-nous à
Gebr. FALLER GmbH, kundendienst@faller.de, Kreuzstraße 9, D-78148 Gütenbach (R.F.A.).
Nous vous ferons parvenir la pièce par retour.
Dans cette boîte se trouvent quelques pièces qui ne seront pas utilisées pour le montage.
Vóór het bouwen zou men de gietstukken en de handleiding moeten bestuderen.
Indien onverhoopt een onderdeel aan het bouwpakket ontbreekt, gelieve men het ontbrekende deel
in de handleiding aan te kruisen en deze te zenden aan Gebr. FALLER GmbH, kundendienst@faller.de,
Kreuzstraße 9, D-78148 Gütenbach. U ontvangt dan omgaand en gratis het ontbrekende onderdeel.
Van dit bouwpakket worden enkele kunststof delen niet gebruikt.
D
F
GB
NL
Art. Nr. 170688
SPEZIAL-SEITENSCHNEIDER
zum gratfreien Abtrennen von feinsten
Spritzteilen.
Nur für Polystyrol geeignet.
Special side cutter for cutting off ultra-fine
moulded parts without burrs.
Only suitable for polystyrene.
Pince coupante spéciale pour couper sans
bavure les pièces miniatures moulées par
injection. Convient uniquement au polystyrène.
Speciale zijkniptang voor het braamloos
afknippen van de fijnste gietstukdelen.
Alleen geschikt voor polystyrol.
Für den Zusammenbau des Modells empfehlen wir folgende FALLER-Artikel (sind nicht im Bausatz enthalten):
For the assembly of the kit we recommend following FALLER products (not included in the kit):
Pour l’assemblage du modèle, nous vous recommandons les articles FALLER suivants (non inclus dans le kit):
Om dit model te bouwen adviseren wij de volgende FALLER producten (maken geen deel uit van deze bouwset):
Art. Nr. 170492
FALLER-EXPERT
Flüssigkleber in Plastikflasche mit Spezialkanüle
für feinste Klebstoffdosierung.
Liquid cement in plastic bottle with canule
for very fine dosage.
Colle liquide en bouteille plastique
avec bec verseur pour un dosage précis.
Vloeibare lijm in plastic-flacon met doseerbuisje
om nauwkeurig te lijmen.
Inhalt Spritzlinge
Contents Sprues
Contenu Moulages
Inhoud Gietstukken
1 A
1
x
1 B
1
x
2 A
2
x
2 B
5
x
3 A
1
x
3 B
1
x

Faller 140445 Specifications

General

Brand	Faller
Model	140445
Category	Toy
Language	English

Summary

Kirmesbude Meer-Fisch Model Kit Overview

Handling Missing Parts and Returns

Instructions for reporting missing parts and the return process for replacements.

Recommended Assembly Accessories

Lists recommended additional FALLER products for model assembly, such as glue and cutters.

Model Assembly Steps

Assembly Step A: Base Structure

Assembling the main base with decorative elements.

Assembly Step B: Side Panels

Attaching side panels to the main structure.

Assembly Step C: Left Side Detail

Detailed assembly of the left side section.

Assembly Step D: Right Side Detail

Detailed assembly of the right side section.

Assembly Step E: Final Base Assembly

Connecting major sub-assemblies to form the base.

Assembly Step F: Front Panel Attachment

Attaching front decorative panels.

Assembly Step G: Counter Unit

Assembling the counter and display unit.

Assembly Step H: Main Body Detailing

Adding decorative elements to the main body.

Assembly Step J: Connecting Main Sections

Joining the main chassis and rear sections.

Assembly Step K: Wheel Assembly

Assembling the wheels for the chassis.

Assembly Step L: Chassis Attachment

Attaching wheels to the chassis.

Assembly Step O: Rear Section Detail

Adding detail to the rear section.

Assembly Step P: Front Display Area

Assembling the front display and railing.

Assembly Step Q: Decorative Panel

Attaching a decorative panel to the structure.

Assembly Step R: Final Assembly Stage

Integrating decorative elements into the main structure.

Assembly Step S: Side Post Details

Attaching vertical decorative posts.

Assembly Step T: Sign Attachments

Mounting signs on the structure.

Assembly Step U: Further Sign Attachments

Attaching additional signs to the structure.

Assembly Step V: Main Structure Completion

Completing the main body with decorations.

Assembly Step W: Decorative Strips

Applying decorative strips to the base.

Assembly Step X: More Decorative Strips

Applying more decorative strips to the base.

Assembly Step b: Rear Section Detailing

Adding final details to the rear section.

Assembly Step c: Small Component Assembly

Assembling small, detailed components.

Assembly Step d: Connector Piece

Attaching a connector piece.

Assembly Step e: Interior Detailing

Adding interior details and decorations.

Assembly Step f: Electrical Component Integration

Integrating electrical components (not included).

Assembly Step g: Main Body Assembly

Assembling the main body structure.

Assembly Step h: Decorative Trim

Attaching decorative trim pieces.

Assembly Step i: Upper Structure Assembly

Assembling the upper section of the model.

Assembly Step j/k/l: Front Decorative Panels

Attaching front decorative panels with motifs.

Assembly Step m/n/o: Side Decorative Panels

Attaching side decorative panels with motifs.

Assembly Step p/q/s: Rear Decorative Panels

Attaching rear decorative panels and trim.

Assembly Step r: Main Roof Structure

Assembling the main roof structure.

Assembly Step t: Main Structure Lower Section

Assembling the lower main structure.

Assembly Step u: Hanging Signs Assembly

Assembling hanging signs for display.

Assembly Step v: Second Hanging Signs

Assembling additional hanging signs.

Assembly Step w: Flagpole Assembly

Assembling the flagpole and flag elements.

Assembly Step x: Final Model Configuration

Final configuration of the model with all parts attached.

Assembly Step y/z: Upper Structure Details

Adding upper structure details and supports.

Assembly Step A: Decorative Banners

Attaching decorative banners to the model.

Assembly Step B: Final Model View

Final assembled view of the model.

Assembly Step C: Lighthouse/Tower Detail

Assembling a lighthouse or tower component.

Assembly Step D: Figurines and Details

Attaching figures and small details.

Assembly Step E: Contents Bag Reference

Reference to the contents bag.

Assembly Step F: Glue Application Tip

Instruction on using instant modelling cement.

Assembly Step G: Final Model Appearance

Final appearance of the assembled 'Meer-Fisch' model.