Faller HISTORICAL TOWN GATE User Manual

Sa. Nr. 232 382 1
HISTORISCHES STADTTOR
HISTORICAL TOWN GATE
PORTE DE VILLE HISTORIQUE
HISTORISCHE STADSPOORT
Art. Nr. 232382
Vor Beginn des Bastelns sollten Sie sich mit den Spritzlingen und der Anleitung vertraut machen.
Sollte es einmal vorkommen, dass ein Teil im Bausatz fehlt, kreuzen Sie bitte das fehlende Teil in
der Anleitung an und schicken Sie diese bitte an Fa. Gebr. FALLER GmbH, Abt. Kundendienst,
kundendienst@faller.de, Kreuzstraße 9, 78148 Gütenbach. Sie erhalten dann umgehend Ersatz.
Es kann vorkommen, dass bei einem Bausatz Einzelteile übrig sind.
Before beginning with the assembly please familiarize yourself with the parts and read the instructions carefully.
In case of missing parts please indicate these on the instructions leaflet with a circle and return
the leaflet to Gebr. FALLER GmbH, kundendienst@faller.de, Kreuzstraße 9, D-78148 Gütenbach, Germany.
You will receive the replacement by return.
It may happen in a kit that some parts are not required.
Avant de commencer le montage de votre maquette bien lire la notice et repérer les grappes.
Si une pièce manque dans une boîte, cochez la pièce correspondante sur la notice et renvoyez-la-nous à
Gebr. FALLER GmbH, kundendienst@faller.de, Kreuzstraße 9, D-78148 Gütenbach (R.F.A.).
Nous vous ferons parvenir la pièce par retour.
Dans certains kits, il est possible que certaines pièces ne soient pas utilisées.
Vóór het bouwen zou men de gietstukken en de handleiding moeten bestuderen.
Indien onverhoopt een onderdeel aan het bouwpakket ontbreekt, gelieve men het ontbrekende deel
in de handleiding aan te kruisen en deze te zenden aan Gebr. FALLER GmbH, kundendienst@faller.de,
Kreuzstraße 9, D-78148 Gütenbach. U ontvangt dan omgaand en gratis het ontbrekende onderdeel.
Het kan voorkomen dat u bij bepaalde bouwdozen onderdelen overhoudt.
D
F
GB
NL
Art. Nr. 170688
SPEZIAL-SEITENSCHNEIDER
zum gratfreien Abtrennen von
einsten Spritzteilen.
Nur für Polystyrol geeignet.
Special side cutter for cutting off
ultra-fine moulded parts without burrs.
Only suitable for polystyrene.
Pince coupante spéciale pour couper sans
bavure les pièces miniatures moulées par
injection. Convient uniquement au polystyrène.
Speciale zijkniptang voor het braamloos
afknippen van de fijnste gietstukdelen.
Alleen geschikt voor polystyrol.
Für den Zusammenbau des Modells empfehlen wir folgende FALLER-Artikel (sind nicht im Bausatz enthalten):
For the assembly of the kit we recommend following FALLER products (not included in the kit):
Pour l’assemblage du modèle, nous vous recommandons les articles FALLER suivants (non inclus dans le kit):
Om dit model te bouwen adviseren wij de volgende FALLER producten (maken geen deel uit van deze bouwset):
Art. Nr. 170492
FALLER-EXPERT
Flüssigkleber in Plastikflasche mit
Spezialkanüle für feinste Klebstoffdosierung.
Liquid cement in plastic bottle with
canule for very fine dosage.
Colle liquide en bouteille plastique
avec bec verseur pour un dosage précis.
Vloeibare lijm in plastic-flacon met doseerbuisje
om nauwkeurig te lijmen.
Inhalt Spritzlinge
Contents Sprues
Contenu Moulages
Inhoud Gietstukken
1
2
x
2
2
x
3
2
x
4
1
x
5
1
x

Faller HISTORICAL TOWN GATE Specifications

General

Brand	Faller
Model	HISTORICAL TOWN GATE
Category	Toy
Language	English

Summary

Introduction and Preparation

Handling Missing Parts and General Instructions

Guidance on reporting missing parts and general assembly notes in multiple languages.

Recommended Assembly Tools and Adhesives

Lists and describes recommended FALLER products for model assembly, such as glue and cutters.

Tower Base and Lower Section Assembly

Constructing the Tower Base Structure

Step-by-step illustration for assembling the initial base and archway of the town gate.

Assembling the Lower Tower Walls

Illustrates the assembly of the first wall sections and floor for the tower.

Adding Decorative Elements to Tower Facade

Instructions for attaching decorative pieces, including the clock face, to the tower.

Tower Mid-section and Spire Construction

Integrating Illumination Housing

Details on installing the internal structure for potential illumination (not included).

Assembling Tower Wall Sections and Frames

Steps for assembling further tower wall segments and internal framing.

Preparing and Attaching Paper Masks

Instructions for preparing and attaching paper masks for windows or details.

Adding Tower Details and Base Supports

Assembling Base Tower Supports

Illustrates the construction of decorative supports for the tower's base.

Constructing and Attaching Wall Panels

Steps for assembling and joining the main wall panels of the tower.

Assembling Upper Tower Sections

Instructions for building the upper parts of the main tower.

Finalizing the Main Tower Spire

Assembling Decorative Base Elements

Steps for assembling decorative elements that attach to the tower's base.

Constructing and Attaching Tower Spires

Detailed instructions for assembling the various spire components and attaching them.

Finishing the Main Tower

Assembling the Central Spire

Instructions for assembling the tallest spire and its elements.

Attaching the Main Spire and Final Touches

Guidance on attaching the completed spire and a note about not gluing certain parts.

Assembling Additional Buildings

Assembling Building Facades and Interiors

Steps for constructing the facades and internal structures of the additional buildings.

Preparing and Attaching Window Details

Instructions for preparing window masks and attaching them to the building sections.

Finalizing Additional Buildings

Adding Roofs and Building Details

Instructions for attaching roofs and other small decorative elements to the additional buildings.

Attaching Curtains and Finalizing Sections

Steps for adding interior curtains and joining the final building sections.