Faller Pizzeria Alfredo User Manual

Sa. Nr. 230 588 0
PIZZERIA »ALFREDO«
ALFREDO’S PIZZERIA
PIZZERIA »ALFREDO«
PIZZERIA »ALFREDO«
Art. Nr. 130446
Vor Beginn des Bastelns sollten Sie sich mit den Spritzlingen und der Anleitung vertraut machen.
Sollte es einmal vorkommen, dass ein Teil im Bausatz fehlt, kreuzen Sie bitte das fehlende Teil in
der Anleitung an und schicken Sie diese bitte an Fa. Gebr. FALLER GmbH, Abt. Kundendienst,
kundendienst@faller.de, Kreuzstraße 9, 78148 Gütenbach. Sie erhalten dann umgehend Ersatz.
In diesem Bausatz sind einige Kunststoffteile übrig.
Before beginning with the assembly please familiarize yourself with the parts and read the instructions carefully.
In case of missing parts please indicate these on the instructions leaflet with a circle and return
the leaflet to Gebr. FALLER GmbH, kundendienst@faller.de, Kreuzstraße 9, D-78148 Gütenbach, Germany.
You will receive the replacement by return.
Some of the parts in this box are not needed to construct the model.
Avant de commencer le montage de votre maquette bien lire la notice et repérer les grappes.
Si une pièce manque dans une boîte, cochez la pièce correspondante sur la notice et renvoyez-la-nous à
Gebr. FALLER GmbH, kundendienst@faller.de, Kreuzstraße 9, D-78148 Gütenbach (R.F.A.).
Nous vous ferons parvenir la pièce par retour.
Dans cette boîte se trouvent quelques pièces qui ne seront pas utilisées pour le montage.
Vóór het bouwen zou men de gietstukken en de handleiding moeten bestuderen.
Indien onverhoopt een onderdeel aan het bouwpakket ontbreekt, gelieve men het ontbrekende deel
in de handleiding aan te kruisen en deze te zenden aan Gebr. FALLER GmbH, kundendienst@faller.de,
Kreuzstraße 9, D-78148 Gütenbach. U ontvangt dan omgaand en gratis het ontbrekende onderdeel.
Van dit bouwpakket worden enkele kunststof delen niet gebruikt.
D
F
GB
NL
Art. Nr. 170688
SPEZIAL-SEITENSCHNEIDER
zum gratfreien Abtrennen von feinsten
Spritzteilen.
Nur für Polystyrol geeignet.
Special side cutter for cutting off ultra-fine
moulded parts without burrs.
Only suitable for polystyrene.
Pince coupante spéciale pour couper sans bavure
les pièces miniatures moulées par
injection. Convient uniquement au polystyrène.
Speciale zijkniptang voor het braamloos
afknippen van de fijnste gietstukdelen.
Alleen geschikt voor polystyrol.
Für den Zusammenbau des Modells empfehlen wir folgende FALLER-Artikel (sind nicht im Bausatz enthalten):
For the assembly of the kit we recommend following FALLER products (not included in the kit):
Pour l’assemblage du modèle, nous vous recommandons les articles FALLER suivants (non inclus dans le kit):
Om dit model te bouwen adviseren wij de volgende FALLER producten (maken geen deel uit van deze bouwset):
Art. Nr. 170492
FALLER-EXPERT
Flüssigkleber in Plastikflasche mit Spezialkanüle
für feinste Klebstoffdosierung.
Liquid cement in plastic bottle with canule
for very fine dosage.
Colle liquide en bouteille plastique
avec bec verseur pour un dosage précis.
Vloeibare lijm in plastic-flacon met doseerbuisje
om nauwkeurig te lijmen.
Inhalt Spritzlinge
Contents Sprues
Contenu Moulages
Inhoud Gietstukken
163-02
1
x
164-09
1
x
167-02
1
x
167-07
1
x
167-10
1
x
167-11
1
x
168-05
1
x
168-06
1
x
168-11
1
x
168-15
1
x
178-12
1
x
167-03
1
x 168-01
1
x 168-13
1
x
459-01
1
x

Faller Pizzeria Alfredo Specifications

General

Brand	Faller
Model	Pizzeria Alfredo
Category	Toy
Language	English

Summary

ALFREDO'S PIZZERIA Model Kit

General Instructions and Missing Parts

Guides on initial assembly steps, handling missing parts across multiple languages, and unused parts.

Recommended Accessories for Assembly

Lists recommended additional FALLER products for model assembly, such as glue and cutters.

Window Foil Application

Applying Window Foil

Instructions for cutting and gluing the transparent window foil to the model's window frames.

Main Building Assembly

Applying Decorative Films and Joining Walls

Details on applying decorative elements (Deco 21, Deco 23, Deco 16) and connecting wall sections (41, 40, 411).

Window Foil and Exterior Wall Attachment

Instructions for applying window foil (11) to wall section (9) and attaching decorative exterior walls.

Interior Counter Assembly

Constructing the Counter Unit

Step-by-step assembly of the interior counter structure using parts 12-11 through 12-18 and decorative elements.

Interior Furnishing

Assembling Tables, Seating, and Decorative Items

Instructions for assembling various furniture pieces, including tables, chairs, and decorative elements like pool tables.

Further Window Foil Application

Applying Window Foil to Building Facades

Detailed steps for applying window foil to specific wall sections (22, 23) on different building parts.

Finishing Building Facades

Window Foil Application and Masking

Steps for applying window foil to building sections and using paper masks for finishing operations.

Main Building Assembly Progression

Connecting Building Sections

Illustrates the connection of major building sections (U, V) and external walls (4) to form the complete structure.

Lighting and Roof Installation

Incorporating Lighting and Cable Management

Guidance on installing optional lighting and managing internal cables, referencing paper mask M1.

Final Assembly and Detailing

Attaching Roof Details and Decorative Elements

Instructions for assembling chimneys, vents, decorative elements (Deco 5), and final finishing touches.

Final Exterior Details

Applying Final Window Foil and Facade Elements

Steps for applying window foil (19) to facade (22) and attaching exterior decorative elements (19a, 19b, Deco 19).

Completing the Building Exterior

Final assembly steps for roof details (02-12, 02-13) and decorative additions (Deco 10, Deco 15, Deco 18) to the exterior.