Faller SCHWARZACH User Manual

Sa. Nr. 228 698 0
BAHNHOF »SCHWARZACH«
»SCHWARZACH« STATION
GARE DE »SCHWARZACH«
STATION »SCHWARZACH«
Art. Nr. 212108
Vor Beginn des Bastelns sollten Sie sich mit den Spritzlingen und der Anleitung vertraut machen.
Sollte es einmal vorkommen, dass ein Teil im Bausatz fehlt, kreuzen Sie bitte das fehlende Teil in
der Anleitung an und schicken Sie diese bitte an Fa. Gebr. FALLER GmbH, Abt. Kundendienst,
kundendienst@faller.de, Kreuzstraße 9, 78148 Gütenbach. Sie erhalten dann umgehend Ersatz.
In diesem Bausatz sind einige Kunststoffteile übrig.
Before beginning with the assembly please familiarize yourself with the parts and read the instructions carefully.
In case of missing parts please indicate these on the instructions leaflet with a circle and return
the leaflet to Gebr. FALLER GmbH, kundendienst@faller.de, Kreuzstraße 9, D-78148 Gütenbach, Germany.
You will receive the replacement by return.
Some of the parts in this box are not needed to construct the model.
Avant de commencer le montage de votre maquette bien lire la notice et repérer les grappes.
Si une pièce manque dans une boîte, cochez la pièce correspondante sur la notice et renvoyez-la-nous à
Gebr. FALLER GmbH, kundendienst@faller.de, Kreuzstraße 9, D-78148 Gütenbach (R.F.A.).
Nous vous ferons parvenir la pièce par retour.
Dans cette boîte se trouvent quelques pièces qui ne seront pas utilisées pour le montage.
Vóór het bouwen zou men de gietstukken en de handleiding moeten bestuderen.
Indien onverhoopt een onderdeel aan het bouwpakket ontbreekt, gelieve men het ontbrekende deel
in de handleiding aan te kruisen en deze te zenden aan Gebr. FALLER GmbH, kundendienst@faller.de,
Kreuzstraße 9, D-78148 Gütenbach. U ontvangt dan omgaand en gratis het ontbrekende onderdeel.
Van dit bouwpakket worden enkele kunststof delen niet gebruikt.
D
F
GB
NL
Art. Nr. 170688
SPEZIAL-SEITENSCHNEIDER
zum gratfreien Abtrennen von feinsten
Spritzteilen.
Nur für Polystyrol geeignet.
Special side cutter for cutting off ultra-fine
moulded parts without burrs.
Only suitable for polystyrene.
Pince coupante spéciale pour couper sans
bavure les pièces miniatures moulées par
injection. Convient uniquement au polystyrène.
Speciale zijkniptang voor het braamloos
afknippen van de fijnste gietstukdelen.
Alleen geschikt voor polystyrol.
Für den Zusammenbau des Modells empfehlen wir folgende FALLER-Artikel (sind nicht im Bausatz enthalten):
For the assembly of the kit we recommend following FALLER products (not included in the kit):
Pour l’assemblage du modèle, nous vous recommandons les articles FALLER suivants (non inclus dans le kit):
Om dit model te bouwen adviseren wij de volgende FALLER producten (maken geen deel uit van deze bouwset):
Art. Nr. 170492
FALLER-EXPERT
Flüssigkleber in Plastikflasche mit Spezialkanüle
für feinste Klebstoffdosierung.
Liquid cement in plastic bottle with canule
for very fine dosage.
Colle liquide en bouteille plastique
avec bec verseur pour un dosage précis.
Vloeibare lijm in plastic-flacon met doseerbuisje
om nauwkeurig te lijmen.
Inhalt Spritzlinge
Contents Sprues
Contenu Moulages
Inhoud Gietstukken
1
1
x
2
1
x
3
1
x
4
1
x
5
1
x
6
1
x
7
1
x
8
1
x

Faller SCHWARZACH Specifications

General

Brand	Faller
Model	SCHWARZACH
Category	Toy
Language	English

Summary

Introduction and Kit Overview

Handling Missing or Surplus Parts

Instructions for reporting missing parts and identifying surplus parts included in the kit.

Recommended Tools and Accessories

List of additional FALLER products recommended for optimal model assembly and finishing.

Kit Contents: Sprues List

An overview of the different sprues and their quantities included in the model kit.

Component Identification

Sprue 4: Roof Components

Diagram identifying parts on sprue 4, likely for the main building roof section.

Sprue 5: Facade Elements

Diagram identifying parts on sprue 5, used for building facade construction.

Sprue 6: Window Frames

Diagram identifying parts on sprue 6, primarily window frames and related details.

Sprue 7: Structural Supports

Diagram identifying parts on sprue 7, used for structural support elements.

Window Detailing

Applying Window Foil

Step-by-step guide for applying window foil to the model's windows without adhesive.

Window Cutting Guide

Diagram showing the numbered layout for cutting and applying window sections.

Main Building Construction

Attaching Window Frames

Diagram C illustrates the process of attaching window frames to the main building walls.

Connecting Building Sections

Diagram E shows how the primary building sections are joined together.

Exterior Detailing and Decorations

Front Facade Decorations

Instructions for applying decorative elements and parts to the front of the building.

Rear Facade Decorations

Instructions for applying decorative elements and parts to the rear of the building.

Base and Main Structure Integration

Mounting Building on Base

Diagram J shows the assembled main building being placed onto its base structure.

Roof and Final Construction Stages

Attaching Roof Details

Diagrams K and L detail the attachment of roof components and decorative elements.

Completing Model Structure

Diagram M illustrates the final connection of major sections for the model.

Station Signage and Finishing

Applying Station Signs

Instructions for attaching the 'Schwarzach' station name signs to the model.

Adding Final Decorative Pieces

Diagram P shows the placement of the last decorative elements on the model.

Platform and Ancillary Details

Assembling Platform and Signage

Diagram S shows the construction of the station platform with signage.

Attaching Roof Details

Diagram T illustrates the attachment of specific roof components and details.

Final Model Presentation

Diagram U shows the completed model with all components assembled and in place.

Accessory Assembly

Assembling Small Accessories

Diagrams W and X show the assembly of smaller detail parts for the model.