EasyManua.ls Logo

FAME Pro Series - User Manual

FAME Pro Series
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ENGLISH
Important safety instructions! Please read before connection!
DANGER! (Electric shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the device.
Inside the unit there are components which are under high electrical voltage.
Before each use, check the device for damage or the absence of components, protective
devices or housing parts. If this is the case, do not use the device!
Leave maintenance and repair work to a qualified service workshop or contact your
dealer.
DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is damaged, it
must be replaced immediately with an original spare part from the manufacturer. Failure
to do so may result in fire or death due to electric shock!
DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must be kept out
of the reach of babies and children due to the danger of suffocation.
Make sure that children never use the device unattended! In addition, make sure that
children do not remove (small) parts from the device, as they could suffocate by
swallowing parts!
Hint! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is 40°C.
Ensure that the unit is placed in a place with adequate ventilation, out of the reach of
direct heat sources, naked flames and combustible materials and liquids.
The ventilation slots of the device must not be taped or covered.
Hint! (Operating conditions)
Due to its structural characteristics, the device is designed for indoor operation (IP20).
Never expose the device to rain, moisture or liquids as this may cause damage.
Vibrations, dust or solar radiation can also lead to damage, avoid them!
Hint! (Condensation)
To avoid condensation in the unit, the unit should adapt to the ambient temperature
before commissioning.

Questions and Answers

  • M
    Michaela CollinsJul 29, 2025
    What to do if my FAME Pro have no tone?
    • T
      Teresa Woodard DVMJul 29, 2025
      If your FAME Speakers have no tone, you should: * Check the cable for any damage, such as cuts or extreme kinks, and replace it if needed. * Ensure the wiring connectors are fully inserted and snap into place. * Gradually increase the volume of both speakers using the volume control located on the rear panel. * Verify the input/output settings in the audio settings of your operating system or the DAW you're using, ensuring the correct outputs of your audio interface are selected.
  • J
    Jacob BakerAug 10, 2025
    Why do my FAME Pro Speakers sound dull or height-heavy?
    • J
      Jessica GibsonAug 10, 2025
      If your FAME Speakers sound dull or height-heavy, inspect the HF (High Filter) settings on the back of the speakers. This setting allows you to adjust higher frequencies to better suit the room's acoustics by either attenuating or amplifying them.

Summary

Essential Safety Instructions

Electrical Shock and Fire Hazards

Covers dangers from high voltages, short circuits, and overheating risks.

Child Safety and Environmental Conditions

Addresses risks to children and proper operating/environmental conditions.

Power Supply and Usage Precautions

Details safe power connection and handling during use or non-use.

Feedback and Odour Management

Advises on preventing feedback and managing initial product odours.

Product Usage and Connection

Product Information and Intended Use

Outlines product purpose, scope of delivery, and user qualifications.

Handling and Installation Guidelines

Covers power cable, opening restrictions, liquid warnings, and installation.

Connection Procedures and Configuration

Explains recommended connections, feedback prevention, and XLR configuration.

Technical Details and Troubleshooting

Technical Specifications and Performance

Lists key features like woofer size, power, frequency response, and inputs.

Troubleshooting Common Problems

Provides solutions for issues like no sound or poor audio quality.

Maintenance and Disposal

Cleaning and Care Instructions

Details how to clean the device and ventilation grilles safely.

Environmental Protection and Disposal

Covers recycling packaging, batteries, and proper device disposal.

FAME Pro Series Specifications

General IconGeneral
Configuration2-way
Power handling RMS300 W
Power handling Program600 W
Beam angle90° x 60°
Pole mountYes
ComponentsWoofer
Impedance8 Ohms
Enclosure TypeBass-reflex

Related product manuals