EasyManua.ls Logo

FAME Pro Series - Troubleshooting Common Problems

FAME Pro Series
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
Troubleshooting:
The following overview serves as an aid for quick troubleshooting. If you should be uncertain,
contact the manufacturer, the dealer or the corresponding specialist personnel. Never open the
device yourself!
If the specified fixes have not been successful, please contact our service staff. The contact
details can be found at www.musicstore.de
Symptom
Troubleshooting
No tone
Check the cable for damage (cuts, extreme kinks,
etc.) and replace if necessary.
Check the wiring. Connectors must be fully
inserted and snap into place!
Slowly increase the volume of both speakers using
the volume control on the rear panel.
Check the input/output section in the audio
settings of your operating system or in the DAW
(digital audio workstation) you are using. The
correct outputs of your audio interface should be
selected here. Please read the corresponding
manual of the software/operating system.
Dull sound/height-heavy sound
Check the HF (High Filter) settings on the back of
the speakers. This attenuates or amplifies higher
frequencies and serves to adapt to the room.

Related product manuals