- 1 -
LE-02d CT
Electric energy meter,
3-phase
The LE-02d CT is a static (electronic) calibrated three-phase alter-
nating current electricity meter in a semi-indirect system.
The indicator is designed to work with current transformers with
primary current Ip from 5÷6000 A and secondary current 5 A.
The maximum measured current is determined by the value of
the primary current Ip current transformer used.
You can set the index value of the gear used transformers, al-
lowing you to identify the actual value taken by the electricity
system.
A special electronic system under the influence of current flow
and applied voltage in each phase generates pulses in propor-
tion to the electricity consumed in this phase. Phase energy
consumption is indicated by flashing the corresponding LED (L1,
L2, L3). The sum of the three phases of pulses indicated by a fla-
shing LED is converted to energy taken in the entire three-phase
system, and its value is determined by the segment LCD display.
Purpose
Functioning
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
To Next Page
Need help?
General
