F&P Eson 2 - TECHNICAL SPECIFICATIONS; Performance Data

6 ENGLISH
OXYGEN/PRESSURE PORT CONNECTOR
If pressure readings and/or additional oxygen are required, an Oxygen/Pressure Port Connector
is available (REF 900HC452). Please contact your healthcare provider.
TECHNICAL SPECIFICATIONS
F&P ESON 2 EXHAUST FLOW
The F&P Eson 2 Nasal Mask has a unique Diuser System that is designed to diuse air which
is expelled from the mask. This reduces draft. The Diuser does not significantly change the
amount of air flowing from the mask; therefore, the mask can be used with or without the
Diuser.
Pressure (cmH
2
O) 4 6 8 10 12 14 16 18 20 22 24 26 28 30
Flow with Diuser (L/min) 19 25 29 34 38 41 45 48 52 55 58 61 63 66
Flow without Diuser (L/min) 27 34 39 44 48 52 56 59 62 66 69 71 74 77
Due to manufacturing variations, the exhaust flow rates may vary from the nominal values
shown above.
Exhaust Flow (L/min)
Pressure (cmH
2
O)
WITHOUT
Diuser
WITH
Diuser
80
60
40
20
0
4 6 8 10 12 14 16 18 20 22 24 26 28
30
RESISTANCE TO FLOW
Pressure drop through mask with Diuser @ 50 L/min: 0.19 ± 15% cmH
2
O
Pressure drop through mask with Diuser @ 100 L/min: 0.77 ± 15% cmH
2
O
Pressure drop through mask without Diuser @ 50 L/min: 0.17 ± 15% cmH
2
O
Pressure drop through mask without Diuser @ 100 L/min: 0.71 ± 15% cmH
2
O
MASK DEAD SPACE
Small: 69 cc Medium: 86 cc Large: 98 cc
SOUND
The sound power level of mask with Diuser is 21.3 dBA, with uncertainty 2.5 dBA
The sound pressure level of the mask with Diuser is 13.3 dBA, with uncertainty 2.5 dBA.
The sound power level of mask without Diuser is 31.4 dBA, with uncertainty 2.5 dBA
The sound pressure level of the mask without Diuser is 23.4 dBA, with uncertainty 2.5 dBA.
The F&P Eson 2 Nasal Mask and accessories are not made with natural rubber latex.
For single patient reuse, the mask should be replaced no later than 12 months after the date of
first use.
TECHNICAL INFORMATION