Model 88C Instruction Manual
1 Introduction
The Model 88C Resistivity Meter measures the resistivity of fluids, slurries, and
semisolids according to API recommended practice. Field and laboratory personnel
rely on this instrument to evaluate formation characteristics from electric logs.
Resistivity is the ability of a material to resist conduction; conductivity is the
reciprocal of resistivity.
1.1 Document Conventions
The following icons are used as necessary in this instruction manual.
NOTE. Notes emphasize additional information that may be
useful to the reader.
CAUTION. Describes a situation or practice that requires operator
awareness or action in order to avoid undesirable consequences.
MANDATORY ACTION. Gives directions that, if not observed,
could result in loss of data or in damage to equipment.
WARNING! Describes an unsafe condition or practice that if not
corrected, could result in personal injury or threat to health.
ELECTRICITY WARNING! Alerts the operator that there is risk of
electric shock.
207980 Revision F, October 2017 4
To Next Page
Loading...
