Need help?Do you have a question about the FANOX SIA-B Series and is the answer not in the manual?
Procedures for safely removing the relay from its packaging.
Guidelines for safely handling the relay to prevent electrostatic discharge damage.
Instructions for installing, setting up, and maintaining the relay.
Procedures for the safe disposal and recycling of the relay.
Detailed physical dimensions of the relay unit.
Schematic illustrating the electrical connections for the relay.
Description of each terminal and its function on the relay.
Overview of the SIA-B relay's features and capabilities.
Guide to choosing and ordering specific relay configurations.
Guidance on selecting appropriate current transformers for the relay.
Configuration of fundamental parameters for relay operation.
Details and settings for the instantaneous phase overcurrent protection.
Settings for inverse time overcurrent protection for phases.
Explanation and settings for the thermal image protection function.
How to monitor circuit breaker status and performance.
Technical curves defined by the IEC60255-151 standard.
Real-time measurement of electrical parameters.
Monitoring relay states and logging events.
Capturing and analyzing fault data.
Configuration options for digital inputs.
Setting up logic gates for outputs and LEDs.
Accessing and performing tests on relay components.
Information on different power supply options for the relay.
Detailed technical parameters and performance data of the relay.
List of standards the relay complies with.
Details on connecting and communicating via USB.
Using the SICom software for relay management.
Navigation and structure of the relay's menu system.
How to access and modify relay settings.
Steps for verifying correct installation and setup.
Safety precautions regarding electrostatic discharge.
Instructions for ensuring proper grounding of the relay.
Final checks and procedures before operating the facility.
Fields for recording relay identification details.
Forms for documenting relay settings during commissioning.
Section for adding notes and remarks.
To Next Page
General
