Need help?Do you have a question about the FANOX SIA-B and is the answer not in the manual?
Procedures for safely unpacking relays to prevent damage during unpacking and installation.
Precautions for handling sensitive electronic components to prevent electrostatic discharge damage.
Guidelines for the installation, commissioning, and maintenance of the relay.
Technical dimensions of the relay's casing for both vertical and horizontal models.
Diagrams illustrating how to connect the relay for different configurations.
Identification and function of the relay's terminal connections.
Detailed description of the SIA-B relay's features, components, and operation.
Guide for selecting and ordering specific SIA-B relay models based on configurations.
Information on the specialized Current Transformers required for the SIA-B relay.
Guidance on choosing the appropriate Current Transformer for the SIA-B relay.
Procedure for performing test winding with Resin specific CTs.
Procedure for performing test winding with Taped specific CTs.
Configuration and operation of the instantaneous phase overcurrent protection.
Configuration and operation of the inverse time phase overcurrent protection.
Configuration and operation of the thermal image protection function.
Parameters for overall relay operation, including identifier, frequency, and language.
Details on the IEC60255-151 standard inverse time curves supported.
How to view electrical measurements like current and thermal image values.
Understanding the relay's operational states and logging of events.
Overview of the relay's self-diagnostic functions and error reporting.
How to access and use the test menu to verify component operation.
Various methods for powering the SIA-B relay.
Understanding the switch-on-to-fault characteristic and its parameters.
Detailed technical specifications for the SIA-B relay functions.
Compliance with relevant EMC and product safety standards.
Using the front USB port for communication with a PC.
Description of the LCD display and the keypad for user interaction.
Overview of the SICom software for relay configuration and monitoring.
Overview of the relay's menu structure and navigation methods.
How to navigate through the relay's menu system using the keypad.
Accessing and modifying the relay's date and time settings.
Navigating the test menu to check component functionality.
Accessing and viewing measured electrical values.
Navigating and changing various settings for relay operation.
A checklist to guide the commissioning process of the relay.
Ensuring correct earthing connection for safety and performance.
Section for recording identification details of the installed equipment.
Form for recording specific commissioning settings for each function.
To Next Page
General
