e. Take off the motor shaft cover from the
fan head, and revolve the triangle screw off, then let three columns into the three holes in
place fully, and finally tighten the triangle screw counterclockwise.
f. let the notch on the back of the big fan blade stuck in the stopper pin of the motor shaft,
and then tighten the small fan blade counterclockwise.
g. To attach the front grill to the back grill, you should use the grill ring carefully to hold
them together and fasten the grill ring with the screw provided.
INSTRUCTIONS FOR USE
Before using the fan make sure that it is on a flat and stable surface.
Damage may occur if it is placed on an incline or decline.
Set all the switches to OFF position, then insert the plug directly into a standard AC
socket-outlet. Be sure plug fits tightly into outlet.
To Next Page
Loading...