What to do if there is no sound on my Fantec 4KS7800Air Media Player?
If you see an image on your TV but can't hear any sound from your Fantec Media Player, first, check the cable connections by disconnecting and reconnecting the HDMI/AV cable. Then, ensure the mute function isn't enabled by pressing button number 13 on the remote control. Finally, increase the volume by pressing button number 6 on the remote control.
How to fix no image display on Fantec 4KS7800Air Media Player?
If your Fantec Media Player shows no image after being turned on, check that the plug-in power supply is correctly inserted. Also, verify that the power cable and video cable are properly inserted into the media player.
Why Fantec 4KS7800Air has no network connection?
If your Fantec Media Player has no network connection, try these steps: 1. Disconnect and reconnect the network cable. 2. Deactivate and reactivate the WLAN in the network settings. 3. Check your WLAN access settings. 4. Move the player closer to the router.
How to fix Fantec 4KS7800Air Media Player remote control not working?
If the remote control for your Fantec Media Player isn't working, make sure there is a clear line of sight between the remote and the media player. If that doesn't work, try changing the batteries. If the buttons still don't work after these steps, please contact service.
How to fix sound missing on Fantec Media Player?
If your Fantec Media Player shows an image but no sound, first, check the HDMI or AV cable connections by disconnecting and reconnecting them. If that doesn't work, press button number 19 on the remote control to ensure the mute function is off. Finally, press button number 15 on the remote to increase the playback volume.
What to do if my Fantec Media Player remote control does not work?
If your Fantec Media Player remote control isn't working, ensure there's a clear line of sight between the remote and the player. If that doesn't help, try replacing the batteries. If the buttons still don't work after these steps, please contact service.
Why is my Fantec Media Player not connecting to the network?
If your Fantec Media Player has no network connection, check the network cable connection by disconnecting and reconnecting it. If you're using WLAN, deactivate it in the network settings and then switch it on again. Also, check your WLAN access settings and try moving the player closer to the router.
What to do if my Fantec 4KS7800Air Media Player has no image display?
If there is no image displayed after turning on your Fantec Media Player, first check if the plug-in power supply is correctly inserted. Next, ensure the power cable is properly inserted into the media player. Finally, verify that the video cable is correctly inserted.
General| HDR Support | HDR10 |
|---|---|
| Supported Resolutions | 4K UHD (3840x2160), 1080p, 720p, 576p, 480p |
| Audio Output | HDMI |
| Storage Support | USB, SD card |
| Operating System | Android |
| Network Connectivity | Wi-Fi 802.11ac, Ethernet |
| RAM | 2GB |
| Video Codecs | H.265/HEVC, H.264 |
| Video Formats | MP4, MKV, AVI, MOV, TS, M2TS |
| Audio Codecs | AAC, MP3, WMA, FLAC, AC3, DTS |
| Subtitle Support | SRT, SUB, SSA |
| Image Formats | JPEG, PNG, BMP, GIF |
To Next Page
