EN 13 / 17
-- Audio Setup --
Audio Output: - Choose Analog if you use a AV cable.
- Choose SPDIF/PCM if you use a HDMI cable.
LPCM Output: Choose from LPCM 48k or LCPM 96k
-- Video Page --
TV display: Set TV display mode (normal/PS, normal/LB, wide)
TV type: Set TV standard (multi system, PAL, NTSC)
Video output: Set video output resolution (CVBS, 720p, 1080i)
Note: 720p and 1080i can only be displayed via HDMI
-- Preferences Page --
Defaults: Select “Reset” and press “ENTER” to load the default
settings.
Slide time: Set the interval for the slide show (5s / 10s / 15s)
Slide mode: Set transition effect for slide show
Photo digest: Turn photo digest on/off.
Autorun: Turn autorun on/off.
To Next Page
Loading...
