EasyManua.ls Logo

Fantic Motor Enduro 125 Performance User Manual

Fantic Motor Enduro 125 Performance
130 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
MANUALE D’USO - OWNER’S MANUAL - MANUEL D’UTILIZATION
Question and Answer IconNeed help?

Do you have a question about the Fantic Motor Enduro 125 Performance and is the answer not in the manual?

Fantic Motor Enduro 125 Performance Specifications

General IconGeneral
Transmission6-speed
Power11 kW (15 hp) @ 9, 500 rpm
Cooling SystemLiquid
Rear SuspensionKayaba, adjustable
Front BrakeSingle 260 mm disc, 2-piston caliper
Rear BrakeHydraulic disc, ø220 mm
IgnitionElectronic
ClutchWet, multi-disc
Front Tire90/90-21

Summary

Safety Warnings

Technical Specifications

Introduction and Identification

Basic Safety Rules

Steering Lock

Preliminary Checklist

Pre-Ride System Checks

List of essential checks for brakes, throttle, wheels, clutch, etc.

Vehicle Pre-Ride Checks

Running-In Procedures

Break-in Period Guidelines

Advice on stress, routes, speed, and braking during the break-in period.

Vehicle Usage

Vehicle Operation

Periodic Maintenance Chart

Maintenance Schedule Intervals

Table outlining required checks and replacements at different mileage intervals.

Identification and Engine Oil

Engine Oil Maintenance

Changing Engine Oil and Filter

Step-by-step guide to changing engine oil and filter.

Tyre Maintenance

Tyre Pressure and Inflation

Importance of correct tyre pressure for performance and safety.

Tread Depth and Wear Check

Specifications for minimum tread depth and checking tyre wear.

Clutch System

Clutch Adjustment and Checks

How to adjust the clutch cable and check its condition.

Fuel System

Braking System

Brake Fluid and Disk Brakes

Information on brake fluid, disk brake operation, and pad wear.

Front Brake Fluid Check

Checking and topping up front brake fluid level.

Brake Controls and Rear Brake

Rear Brake Fluid Check

Checking and refilling the rear brake fluid reservoir.

Brake and Suspension Checks

Brake Pad Wear Inspection

Inspecting front and rear brake pads for wear.

Suspension Adjustments

Damper Preload Adjustment

Adjusting spring preload for different riding conditions.

Hydraulic Rebound Adjustment

Adjusting the damper's rebound for braking action.

Front Suspension Adjustments

Adjusting front fork settings for riding preferences.

Extension Adjustment

Adjusting the register rebound on the suspension.

Rear Suspension Adjustments

Damper Spring Preload

Adjusting spring preload on the rear shock absorber.

Damper Compression Adjustment

Adjusting the damper's compression for braking action.

Hydraulic Brake Adjustment

Adjusting hydraulic brake settings for braking action.

Chain Maintenance

Chain Tensioning and Adjustment

How to check and adjust chain slack for proper operation.

Chain, Sprocket, Gear Wear Check

Checking the chain, sprocket, and ring gear for wear and damage.

Air Filter Maintenance

Air Filter Replacement

Instructions for replacing the air filter element.

Coolant System

Carburetor and Throttle Control

Throttle Control Adjustment

Spark Plug Maintenance

Electrical System and Battery

Wiring Diagram

Lubricants Table

Related product manuals