fanttik EVO 300 - Safety Instructions

11. SAFETY INSTRUCTIONS
Error code (Output)
E1
E2
E3
E4
E11
E12
E13
E14
E15
E16
E17
E18
Cause
Over-temperature protection
Low temperature protection
Battery over-voltage
Input over-voltage
Discharge Over-temperature
Discharge low temperature
USB-A/USB-C input over-current or short-circuit
QC input over-current or short-circuit
Power supply reversed
DC 12V input or short-circuit
AC 110V input or short-circuit
Total power output overloaded
Solution
Auto Recover/unplug all charging devices
Auto Recover/unplug all charging devices
Auto Recover
Auto Recover
Auto Recover
Auto Recover
Recover by pressing the DC button
Recover by pressing the DC button
Recover by pressing the DC button
Recover by pressing the DC button
Recover by pressing the DC button
Recover by pressing the DC button
IMPORTANT
Failing to follow the advice below could result in serious injury or even death.
Do not disassemble, repair or modify the unit or the battery.
Do not place the unit near or in fire, or expose it to heat. Keep out of direct sunlight.
Do not charge, use or store the unit in a bathroom or in an area exposed to rain or moisture.
Only use the output socket to power external devices. Never connect the output to mains power under any circumstance.
- 11 -
Error icon