4. LED LIGHTS
5. RECHARGING
To use the LED lights, simply press the LED switch button to turn it on. There are 3 light modes, including an SOS mode.
Multiple input options are available for the EVO 300 Power Station.：
X1 To activate the dimmed light (50% of maximum brightness), press the LED light button once when the light
is off.
X2 To activate the bright light (maximum brightness), press the LED light button twice in a row when the light is off.
X3 To activate the SOS light, press the LED light button three times in a row when the light is off.
X4 Press the LED light button four times consecutively to finish a cycle and turn off the light again.
AC Adaptor Car Charger Solar Panel USB-C Port (60W PD)
- 05 -
To Next Page
Loading...
