ENGLISH
GB-9
Automatic lighting with the safety device in
the event of failure.
e appliance is equipped with a safety device
in the event of ignition failure, on each burner.
ese devices are designed to stop the ow of gas
to the head of the burner in the event that the
ame does not light.
To light a burner:
• Press the control knob for the burner that
you want to turn on and turn it in an anti-
clockwise direction to the maximum position.
• If you keep the control knob depressed,
the automatic ignition of the burner will
Automatic lighting with the safety device in
the event of failure.
e appliance is equipped with a safety device
on each burner, in the event of ignition failure.
ese devices are designed to stop the ow of gas
to the burner head in the event that the ame
does not light.
To Next Page
Loading...
