EasyManua.ls Logo

FAR DGV18CH - Page 56

FAR DGV18CH
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
GB-10
work. You must hold the control knob for
15 seconds after the ame on the burner is
lit. If after 15 seconds, the burner is not lit,
stop the operation of the device and open
the compartment door and/or wait at least 1
minute before attempting to turn the burner
on again.
After this interval of 15 seconds, to regulate
the ame, you must continue to turn the
control knob anti-clockwise until the ame is
at an appropriate level. e operating position
MUST be between the maximum and
minimum position.
To turn o the burner, turn the control knob
fully clockwise to turn o the gas.
In the event of a power failure, the burners can
be lit using a match.
Safety and energy saving tips
e diameter of the bottom of the pan must
match that of the burner.
BURNERS
COOKWARE
Min. Max.
Rapid 200 mm 240 mm
Auxiliary 120 mm 160 mm

Other manuals for FAR DGV18CH