ENGLISH
GB-17
Put the parts back in the correct order
after cleaning. Do not mix the top and
the bottom. e holding rods must be
inserted exactly in the notches.
Warnings
• Do not modify this appliance.
• is appliance must be installed by a certied
technician or installer.
• Before the installation, make sure that the
local supply conditions (nature and pressure of
the gas) and the settings of the appliance are
compatible.
• e settings for this appliance are listed on the
label (or rating plate).
• is appliance is not connected to a device
for evacuating the combustion products. It
must be installed and connected according to
the installation standards in force. Particular
respective holes in the ame spreader. e
ame spreader must lock properly in place.
2. Position the cover of the burner (1,2,3) on
the ame spreader (4) so that the holding
rods t in their respective recesses.
To Next Page
Loading...
