ENGLISH
GB-18
attention must be paid to the standards in
force concerning ventilation.
• Before installation, turn o the gas and the
electrical power source of the device.
• All devices containing electrical components
must be earthed.
• Make sure that the gas pipe and the electrical
cable are installed in such a way that they do
not touch any part of the appliance that can
become hot.
• e gas pipe or the connector must not be
folded or blocked by any other appliance.
• Check the dimensions of the appliance as well
as the dimensions of the gap to be cut in the
kitchen cupboard.
• e panels located above the work top, in the
direct vicinity of the appliance, must be made
of non-ammable materials. e laminated
surface and the adhesive used to attach
the hob must be heat resistant to avoid any
deterioration.
• Open the valve of the appliance and light each
burner.
• Check that the ame is transparent blue
without a yellow tip.
To Next Page
Loading...
