ENGLISH
GB-34
Adjusting the gas
• Take precautions for operations and
adjustments to be made during the
conversion of one gas to another.
• All work must be carried out by a
qualied technician.
• Before beginning, turn o the gas
and the electrical power source of the
appliance.
1. Change the burner injector
Injector
Remove the cookware stands,
the burner covers and the ame
spreader.
Unscrew the injector using a 7
mm socket wrench and replace
it with the injector stipulated for
the new gas supply.
Carefully reassemble all the
components.
Once the injectors are replaced,
it is advised to tighten the
injector securely in place.
To Next Page
Loading...
