GB-5GB-4
• Regarding the information for the installation,
operation, maintenance and disposal of the
device, refer to the following paragraph of the
instruction manual.
• For the replacement method of light bulb, refer
to <Changing the LED light>
• To avoid any harm to the environment or
human health caused by the uncontrolled
disposal of electrical waste, recycle the
appliance responsibly to promote the reuse
of material resources. Disposal must be done
safely at public collection points provided for
this purpose.
• Old appliances may contain CFCs which
destroy the ozone layer. Please contact your
nearest waste disposal centre for more details
on the correct disposal procedures.
• e appliance must be installed on the ground,
on a at, horizontal surface making sure the
vents are not obstructed.
• Never attempt to replace or repair any
appliance part or component yourself. Request
help from a professional, qualied person if
needed.
• Always handle the appliance with care in order
to avoid damaging it.
•
Caution: Risk of re
WARNING
• WARNING ─ When positioning the
appliance, ensure the supply cord is not
trapped or damaged.
• WARNING ─ Do not locate multiple portable
socket-outlets or portable power supplies at the
rear of the appliance.
• WARNING ─ Damaged supply cord must be
replaced by a special cord or assembly available
from the manufacture or its service agent.
If the refrigerant circuit is damaged:
– Avoid naked ames and sources of ignition.
– oroughly ventilate the room in which the
appliance is situated.
It is dangerous to alter the specications or
modify this product in any way. Any damage to
the cord may cause a short circuit, re, and/or
electric shock.
To Next Page
Loading...