FAR K109 - Electrical Connection and Grounding; Socket Reachability and Cable Use; Fuse Replacement and Plug Safety

ENGLISHENGLISH
GB-21GB-20
TEMPERATURE ADJUSTMENT AND DISCRIPTION OF
APPLIANCE
TEMPERATURE ADJUSTMENT
– To adjust the temperature inside the freezer
compartment, adjust the temperature control
dial on front-bottom side of the chest freezer,
normally use chest freezer with temperature
MID.
– If the cooing performance is inadequate, turn
the temperature control dial in the direction
of MAX. If it is too cold, turn the dial in the
direction of MIN.
– When you need the unit to stop running
temporally, please turn the temperature control
dial in the direction of 0.
DISCRIPTION OF APPLIANCE
Installation any electrical work that is required to
install this appliance MUST be carried out by a
qualied electrician.
Warning: HIS APPLIANCE MUST BE
GROUNED
Before making any electrical connections, ensure
the following:
Electrical connection
Electrical safety is only guaranteed when the
grounding system of your house is in accordance
with the related local regulations.
Do not bend, stretch or pull the supply cable to
avoid electric shock.
Do not use electrical appliances inside of food
storage compartments of the appliance, unless
they are of the type recommended by the
manufacturer.
Ensure the power socket is suitable for the
maximum power of the machine fuses in the
power circuit must be 13 amp).
e supply voltage should be the same as that
indicated in the technical specications and the
appliance rating plate.
e appliance should be grounded and in
compliance with the applicable laws.