GB-9
BEFORE USE
- Remove all packing materials, adhesive tape, etc. Leave the doors open
for a while to ventilate the unit.
- e unit is cleaned before shipping. Nevertheless, we recommend
cleaning the inside of the compartment once after delivery.
- Plug into an earthed wall socket supplying 220-240 V ~ single-phase
current.
- Let the appliance run for about 1 hour for the compartment to cool
down before placing items in the appliance.
WAIT 5 MINUTES OR MORE BEFORE RE-
STARTING
Restarting the unit immediately after it has been turned o may cause
fuses to blow and activate the circuit breaker the compressor may become
overloaded and/or other damage may occur.
To Next Page
Loading...
