FAR LV12C47REC18IX - Running and Controlling Cycles; Switching Off

ENGLISHENGLISH
GB-9GB-8
Load the baskets Scrape o any large amount of
leftover food. Soften remnants of
burnt food in pans, then load the
baskets. Refer to the dishwasher
loading instructions.
Select a programme Close the door; press the Pro-
gramme button until the selected
programme lights up. (See the sec-
tion entitled “Operationg instruc-
tion”)
Running the dis-
hwasher
Turn on the water tap and press the
Start/Pause button.
Changing the pro-
gramme
1. A running cycle can only be mo-
died if it has been running for a
short time. Otherwise the detergent
may have already been released and
the water already drained. If this
is the case, the detergent dispenser
must be relled.
2. Press the Start/Pause button
then press the program button for
more than 3 seconds to cancel the
running programme.
3. Select a new programme.
4. Restart the dishwasher.
WARNING!
Open the door carefully. Hot
steam may escape when the door
is opened!
Add forgotten dishes
in the dishwasher.
1. Press the start/pause button to
stop the machine.
2. Open the door.
3. Add the forgotten dishes.
4. Close the door, then press the
start/pause button, the dishwasher
will start running again after 10
seconds.
If the appliance is
switched o during
a wash cycle.
If the appliance is switched o
during a wash cycle, when swit-
ched on again, please re-select the
washing cycle and operate the dis-
hwasher according to the original
Power-on state).
Switch o the ap-
pliance
When the working cycle has
nished, the buzzer of the dis-
hwasher will sound 8 times, then
stop.
Turn o the appliance using the
ON/OFF button.