EasyManua.ls Logo

FAR LV13C49M21S - User Manual

Default Icon
155 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
LV13C49M21W
LV13C49M21S

Questions and Answers

  • T
    Tammy HansonAug 17, 2025
    Why are the dishes not clean in my FAR LV13C49M21S Dishwasher?
    • S
      silvashaneAug 17, 2025
      If your dishes aren't coming out clean in your FAR Dishwasher, it could be due to incorrect loading or selecting a program that isn't powerful enough. Refer to PART II «Preparing And Loading Dishes» for guidance on proper loading techniques. Alternatively, try selecting a more intensive wash program.
  • B
    baileylisaAug 19, 2025
    How to improve drying in my FAR LV13C49M21S?
    • S
      Spencer MillerAug 19, 2025
      If your dishes aren't drying properly in your FAR Dishwasher, consider these potential causes: improper loading, removing dishes too soon, or selecting the wrong program. Load the dishwasher as suggested in the directions. Avoid emptying your dishwasher immediately after washing; instead, slightly open the door to allow steam to escape and wait until the inside temperature is safe to touch before unloading, starting with the lower basket. Choosing a program with a longer washing time may also help.
  • N
    Nathaniel JacksonAug 22, 2025
    What to do if there are suds in my FAR LV13C49M21S?
    • P
      patrickhenryAug 22, 2025
      If you find suds in your FAR Dishwasher, it's likely due to using the wrong detergent or spilled rinse-aid. To resolve this, use only special dishwasher detergent. If suds occur, open the dishwasher and let them evaporate. Add 1 gallon of cold water to the bottom of the dishwasher, close the door, and select any cycle. The dishwasher will drain the water. After draining, check if the suds have disappeared and repeat if necessary. Also, wipe up any rinse-aid spills immediately.
  • M
    Michael HughesAug 25, 2025
    Why are there rust stains on cutlery in my FAR LV13C49M21S Dishwasher?
    • B
      Beverly ParrishAug 26, 2025
      Rust stains on cutlery in your FAR Dishwasher can occur if the items aren't corrosion resistant, if a program wasn't run after adding dishwasher salt, or if the softener lid is loose. Avoid washing non-corrosion resistant items in the dishwasher. Always run a wash program without any crockery after adding salt, and avoid using the Turbo function (if available) after adding dishwasher salt. Ensure the softener lid is securely fastened.
  • M
    Monica MoralesAug 27, 2025
    Why do white spots appear on dishes and glasses in my FAR LV13C49M21S?
    • L
      Lynn KimAug 28, 2025
      White spots on dishes and glasses in your FAR Dishwasher are likely caused by limescale deposits in hard water areas. Try adding more detergent to combat this issue.
  • N
    nataliereyesAug 30, 2025
    How to prevent cloudiness on glassware in my FAR LV13C49M21S Dishwasher?
    • K
      Katherine CoxAug 30, 2025
      Cloudiness on glassware in your FAR Dishwasher can result from a combination of soft water and too much detergent. If you have soft water, try using less detergent and select a shorter cycle to wash the glassware.
  • S
    Sharon MooreSep 2, 2025
    What causes a knocking noise in my FAR LV13C49M21S?
    • T
      Theresa RileySep 2, 2025
      A knocking noise in your FAR Dishwasher usually means a spray arm is hitting something in the basket. To fix this, interrupt the program and move the items that are blocking the spray arm.
  • R
    Robert HarrisSep 5, 2025
    What causes rattling noise in my FAR LV13C49M21S?
    • A
      Amanda YoungSep 5, 2025
      Rattling noises in your FAR Dishwasher are usually caused by loose items of crockery. Interrupt the program and rearrange the items.
  • K
    kholmesSep 8, 2025
    What to do if not enough detergent was dispensed in my FAR LV13C49M21S Dishwasher?
    • J
      Jeffrey GordonSep 8, 2025
      If not enough detergent was dispensed in your FAR Dishwasher, use more detergent, or consider changing your detergent.
  • W
    Whitney CarlsonSep 12, 2025
    Why is detergent left in the dispenser of my FAR LV13C49M21S Dishwasher?
    • O
      odonnellmatthewSep 12, 2025
      If detergent is left in the dispenser of your FAR Dishwasher, it's likely that dishes are blocking the dispenser. Try reloading the dishes properly.

Summary

SAFETY INFORMATION

General Operating Safety

Essential safety guidelines for operating the dishwasher and handling potential hazards.

Electrical Earthing Safety

Importance and procedure for proper electrical earthing to prevent shock.

PRODUCT OVERVIEW AND COMPONENTS

INSTALLATION AND CONNECTION GUIDELINES

Electrical Safety and Power Connection

Critical safety warnings and requirements for connecting the dishwasher to power.

Water Supply and Drain Hose Setup

Instructions for connecting water supply, safety hose, and drain hoses.

TROUBLESHOOTING COMMON ISSUES

Resolving Startup and Water Problems

Solutions for common issues such as power, water intake, and door problems.

Addressing Cleaning and Surface Marks

Troubleshooting for suds, interior stains, white film, and rust marks.

Diagnosing Noise and Washing Quality

Addressing operational noises and problems with dishes not being clean.

Detergent, Drying, and Performance

Solutions for issues related to detergent use and dishes not drying properly.

OPTIMAL DISHWASHER LOADING (EN STANDARDS)

USING YOUR DISHWASHER

Control Panel and Program Indicators

Explanation of control panel buttons, indicators, and display functions.

Washing Program Selection Details

Details on various washing programs and their recommended uses.

RINSE AID AND DETERGENT MANAGEMENT

DISHWASHER OPERATING PROCEDURES

ERROR CODES AND TROUBLESHOOTING

Malfunction Identification Guide

Explains common error codes and their potential causes for troubleshooting.

FAR LV13C49M21S Specifications

General IconGeneral
BrandFAR
ModelLV13C49M21S
CategoryDishwasher
LanguageEnglish

Related product manuals