FAR LV12C47REC18IX - Water Softener Setup

ENGLISHENGLISH
GB-15GB-14
Adjusting Salt Consumption
e dishwasher is designed to allow for
adjustment in the amount of salt consumed
based on the hardness of the water used. is is
intended to optimise and customise the level of
salt consumption.
Please follow the steps below for adjustment in
salt consumption.
1. Switch on the appliance;
2. Press the Start/Pause button for more than
5seconds to start the water softener set
model within 60 seconds after the appliance
was switched on;
3. Press the Start/Pause button to select
the proper set according to your local
environment; the sets will change in the
following sequence: H1 H2 H3
H4 H5 H6.
4. Press the On/O button or no operation for
5 seconds to end the set up model.
WATER HARDNESS Selector
Position
Salt
consump-
tion
(gram/
cycle)
°dH °fH °Clark mmol/l
Note:
°DH: German degree
°fH: French degree
°Clark: British degree
1°dH =1.25° Clarke=1.78° fH=0.178mmol/l
e manufactory setting: H (EN 50242)3
0~5 0~9 0~6 0~0.94 H1-Rapid
light bright
0
6-11 10-20 7-14 1.0-2.0 H2-90
Min light
bright
9
12-17 21-30 15-21 2.1-3.0 H3-90
Min and
bright
12
18-22 31-40 22-28 3.1-4.0 H4-Glass
Light
bright
20
23-34 41-60 29-42 4.1-6.0 H5-Glass
light bright
and
Light
bright
30
35-55 61-98 43-69 6.1-9.8 H6-Glass
light bright
and 90
Min light
bright
60
Rapid light
Rapid