Farberware MC-STW1316 User Manual

OPERATION
GRILL
SEAR
Touch FUNCTION
five times
Touch FUNCTION
six times
375°F
400°F
Touch + control or
- control to adjust
temperature in steps of
25°F. Temperature range
from 325°F to 425°F
Touch + control or
- control to adjust
temperature in steps of
25°F. Temperature range
from 375°F to 425°F
NOTE:
• Touch FUNCTION (14) when SEAR is selected to circle back to WARM.
• Touching FUNCTION (14) during operation causes countdown time to reset to
default countdown.
Using the timer
• After desired function is set, touch TIMER (13) to activate timer function.
Default timer setting will appear on display (11). Refer to table below for more
information.
• Adjust time by touching + control (9) or - control (12) while displayed time is
flashing.
• If no time adjustment is performed, displayed time stops flashing and displayed
time is set.
NOTE:
• Touch + control (9) or - control (12) once to add/deduct one minute from
displayed countdown time.
• Hold + control (9) or - control (12) continuously to add/deduct time in steps of
ten minutes from displayed countdown.
• Refer to table below for different timer options.
• When countdown has reached zero (displayed as 0:00) appliance will switch to
standby mode.
• If display (11) shows flashing blue bars" "the unit is still hot. Blue bars" "
stop flashing when unit has cooled down.
10
OPERATION
Function Default Maximum Minimum Default
countdown timer setting timer setting timer setting
WARM
SIMMER
BOIL
FRY
GRILL
SEAR
1:00
1:00
1:00
1:00
1:00
0:20
4:00
4:00
No timer
2:00
2:00
1:00
0:10
0:10
No timer
0:10
0:10
•0:10
0:30
0:30
No timer
0:30
0:30
0:30
CAUTION:
• Add sufficient liquid when operating appliance on countdown or timer to
prevent accidents and to ensure foodstuff does not get burned.
• When BOIL function is selected timer operation is not possible.
• Do not select BOIL mode when using oil.
NOTE: If any control, other than PAUSE (8), is touched during timer operation,
timer stops and default countdown time restarts.
Switching on and off
• Connect power cord with plug (4) to wall outlet (ill. (A)).
• Touch ON/STANDBY (7) to switch appliance on.
• To switch appliance to standby mode, touch ON/STANDBY (7) while appliance
is operating.
• Disconnect the plug (4) from wall outlet (ill. GD).
HINTS AND TIPS
Keep control panel (5) and induction plate (2) always dry, clean and free of any
residue to ensure appliance can be operated with ease (ill. CP)).
The touch controls do not require high pressure to be operated.
11

Farberware MC-STW1316 Specifications

General

Brand	Farberware
Model	MC-STW1316
Category	Cookers
Language	English