To Next PageTo Next Page
Need help?Do you have a question about the Farmcomp Wile 27 and is the answer not in the manual?
General| Application | Grain moisture measurement |
|---|---|
| Power Source | 9V battery |
| Resolution | 0.1% |
| Weight | 300 g |
| Accuracy | +/- 0.5% moisture content |
| Grain Types | Wheat, barley, oats, rye |
| Display | Digital |
| Operating Temperature | 0°C to 40°C |
Initial steps before measurement, including battery and manual check.
Guidance on taking multiple readings in bales for accuracy.
Lists scales for hay/silage and straw based on bale type and density.
How to check and choose the correct measurement scale for the bale type.
Step-by-step guide for performing a moisture measurement.
Instructions on calculating bale density and configuring it in the meter.
How to calculate and store average moisture readings from multiple measurements.
Method to add a single measurement result to the average calculation.
Procedures for clearing previously stored average measurements.
How to adjust the meter's calibration based on external reference tests.
Steps to increase the calibration value by 0.1% increments.
Steps to decrease the calibration value by 0.1% increments.
Explains 'HI' and 'LO' indicators for results outside the measurement range.
Procedures for checking calibration, cleaning, and general care.
Battery type, replacement, and indicator information.
Details on measurement limits, density, and key operating features.
Details of the manufacturer's warranty, service, and storage recommendations.
