Need help?Do you have a question about the Farmcomp wile 55 and is the answer not in the manual?
General| Brand | Farmcomp |
|---|---|
| Model | wile 55 |
| Category | Measuring Instruments |
| Language | English |
Prepare the moisture meter by checking readings, replacing the battery, and cleaning the cup.
Collect samples from different locations and remove exceptional grains for accurate moisture content.
Fill the measuring cup with grain, shake, fill to brim, wipe excess, and tighten the cap.
Turn on the meter with P-button; it automatically calculates and displays moisture content.
Detailed guide on switching on, selecting scale, and obtaining measurement results.
Verify the correct grain scale is selected, referencing the side sticker for the complete list.
Confirm the currently selected scale number by pressing the P-button.
Change the scale using the F-button after pressing P-button until desired scale appears.
View scale adjustments; refer to paragraphs 3.4 and 3.5 for details on adjustments.
The meter calculates the average of multiple measurements, which can be saved.
Save a measurement for averaging by pressing the F-button after the result is displayed.
Clear the average calculation memory by holding the F-button and pressing the P-button.
Correct measurement results based on a reference value by adjusting upwards or downwards.
View current scale adjustment values, which are specific to each scale.
Reset scale adjustments by pressing and holding the F-button for approximately 6 seconds.
Handle results showing 'HI' (high) or 'LO' (low) by checking the scale and performing control measurements.
To Next Page
