EN
samples.
- When taking the sample directly from the dryer wait until the
temperature compensation is done or pre-warm the measuring cup
with warm grain.
- Remember that the moisture inside the load in the grain dryer
varies until the final stage of the drying process.
2.3. Filling the measuring cup
- fill the measuring cup one quarter with grain (1)
- gently shake the meter (grains will settle tighter in the
measuring cup) (2)
- fill the measuring cup to the brim (3)
- wipe off excess grain (4)
- twist and tighten the cap until the center of the cap is on the
same level with the cap's surface (5,6).
2.4. Quick measurement instructions
Switch on the meter with a single press on the P-button. The
5
To Next Page
