A.4.3.
Drawbar Part
1.
Tow Bar
2.
Warp
3.
Warp Height Adjustment Block
4.
Hose Guide
Drawbar part
tractor connection
Drawbar part equipment
connection
,
Drawbar part parking position
Drawbar part working position
Drawbar part is the part providing the connection of
the grain drill with the tractor. At the same time, this
part which also providing the adjustment of the
parallelism of the machine to the ground can be folded
by bringing it to vertical position when the equipment
is parked.
Tow bar must be adjusted to be parallel to the ground
in working position. In order to make this adjustment, it
is designed to be vertically positioned on the warp and
warp height adjustment connection.
To Next Page
Loading...