D. Disconnect the factory electrical harness.
E. Unbolt the tank and remove it from vehicle. Clean all fittings and save for reinstallation.
F. Clean the fuel module area then remove the lock ring/nut. Note/Mark the location of the fuel sending unit
in relation the top of the fuel tank fro re-installation. FORD applications will be spring loaded, hold the
unit down while removing ring to prevent it from popping up and possibly causing damage.
G. Carefully remove fuel sending unit from tank making note of the fuel level arm. Do not bend the arm.
Step 1: Removing Fuel Sending Unit
To Next Page
Loading...