FATEK FBe-28MA User Manual

1
Fatek Automation Corporation
FB Series SIO Driver
1 System Configuration.......................................................................................................3
2 Selection of External Device............................................................................................8
3 Example of Communication Setting.................................................................................9
4 Setup Items....................................................................................................................32
5 Cable Diagram ...............................................................................................................37
6 Supported Devices.........................................................................................................83
7 Device Code and Address Code....................................................................................85
8 Error Messages..............................................................................................................86

FATEK FBe-28MA Specifications

General

Model	FBe-28MA
Digital Inputs	16
Input Type	Sink/Source
Input Voltage	24VDC
Digital Outputs	12
Output Type	Relay
Analog Inputs	0
Analog Outputs	0
Power Supply	24VDC
Weight	0.5 kg
Series	FBe
Communication Ports	RS232, RS485
Operating Temperature	0 to 55 °C
Storage Temperature	-20 to 70 °C
Humidity	5% to 95% (non-condensing)

Summary

Introduction to FB Series SIO Driver

System Configuration Overview

Details the system configuration for connecting external devices to the display.

Selection of External Device

Guide on selecting and specifying the external device for connection.

Example Communication Settings

Provides practical examples for setting up communication parameters.

Setup Items for Communication

Defines and explains the various parameters required for communication setup.

System Configuration Details

Selecting Your External Device

Communication Setting Examples

Setting Example 1

First example demonstrating communication parameter settings via GP-Pro EX.

Setting Example 2

Second example for configuring communication parameters using GP-Pro EX.

Setting Example 3

Third example of communication setup, detailing GP-Pro EX parameter configuration.

Setting Example 4

Setting Example 5

Setting Example 6

Setting Example 7

Setting Example 8

Setting Example 9

Setting Example 10

Setting Example 11

Setting Example 12

Setting Example 13

Settings of External Device

Setup Items

Setup Items in GP-Pro EX

Details on configuring communication parameters within the GP-Pro EX software.

Settings in Offline Mode

Configuration of communication parameters directly via the display's offline menu.