FATEK FBe-40MC User Manual

1
Fatek Automation Corporation
FB Series SIO Driver
1 System Configuration.......................................................................................................3
2 Selection of External Device............................................................................................8
3 Example of Communication Setting.................................................................................9
4 Setup Items....................................................................................................................32
5 Cable Diagram ...............................................................................................................37
6 Supported Devices.........................................................................................................83
7 Device Code and Address Code....................................................................................85
8 Error Messages..............................................................................................................86

FATEK FBe-40MC Specifications

General

Model	FBe-40MC
Points	40
Digital Inputs	24
Digital Outputs	16
Power Supply	24V DC
Series	FBe
Type	Main Processing Unit
Analog Outputs	0
Communication Ports	RS232, RS485
Operating Temperature	0 to 60 °C
Storage Temperature	-20 to 70 °C
Humidity	5% to 95% (non-condensing)
Dimensions	90 x 80 x 60 mm

Summary

1 System Configuration

2 Selection of External Device

3 Example of Communication Setting

3.1 Setting Example 1

First example of communication settings for Display and External Device.

Settings of GP-Pro EX

3.2 Setting Example 2

3.2 Setting Example 2

Second example of communication settings for Display and External Device.

3.3 Setting Example 3

3.3 Setting Example 3

Third example of communication settings for Display and External Device.

3.4 Setting Example 4

3.4 Setting Example 4

Fourth example of communication settings for Display and External Device.

3.5 Setting Example 5

3.5 Setting Example 5

Fifth example of communication settings for Display and External Device.

3.6 Setting Example 6

3.6 Setting Example 6

Sixth example of communication settings for Display and External Device.

3.7 Setting Example 7

3.7 Setting Example 7

Seventh example of communication settings for Display and External Device.

3.8 Setting Example 8

3.8 Setting Example 8

Eighth example of communication settings for Display and External Device.

4 Setup Items

4.1 Setup Items in GP-Pro EX

4.2 Settings in Offline Mode

Communication Settings

5 Cable Diagram

6 Supported Devices

7 Device Code and Address Code

8 Error Messages