FATEK FBe-40MC - 4 Setup Items; 4.1 Setup Items in GP-Pro EX

FB Series SIO Driver
GP-Pro EX Device/PLC Connection Manual
32
4 Setup Items
Set the communication settings of the Display with GP-Pro Ex or in offline mode of the Display.
The setting of each parameter must match that of the External Device.
)"3 Example of Communication Setting" (page 9)
4.1 Setup Items in GP-Pro EX
 Communication Settings
To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC].
Setup Items Setup Description
SIO Type Select the SIO type for communicating with the External Device.
Speed Select the communication speed between the External Device and the Display.
Data Length Select a data length.
Parity Select how to check parity.
Stop Bit Select a stop bit length.
Flow Control
Select the communication control method to prevent overflow of transmission and
reception data.
Timeout
Enter the time (s) for which the Display waits for a response from the External Device,
from "1 to 127".
Continued to next page.