FB Series SIO Driver
GP-Pro EX Device/PLC Connection Manual
34
4.2 Settings in Offline Mode
Communication Settings
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Settings] in offline mode. Touch the
External Device you want to set from the list that appears.
• Refer to the Maintenance/Troubleshooting guide for information on how to enter offline mode
or about the operation.
Cf. Maintenance/Troubleshooting Guide "Offline Mode"
• The number of the setup items to be displayed for 1 page in the offline mode depends on the
Display in use. Please refer to the Reference manual for details.
Setup Items Setup Description
SIO Type
Select the SIO type for communicating with the External Device.
In the communication settings, set [SIO Type] correctly according to the serial interface
specifications of the Display.
If you select an SIO type that the serial interface does not support, proper operation
cannot be guaranteed.
Refer to your Display manual for details on the serial interface specifications.
Speed Select the communication speed between the External Device and the Display.
Data Length Select a data length.
Parity Select how to check parity.
Continued to next page.
To Next Page
Loading...
