FATEK P5043S - Specifications

4
3. Specifications
Model P5043S P5043N
UL 61010-1
Technical
Consideraon
Type of item tested Control
Product Descripon Operator Panel
Connecons to mains
supply
Permanent
Overvoltage category II
Polluon degree 2
Means of Protecon Class III
Environmental condions
Operang Temp. 0~50°C
Storage Temp. -20 ~ 60°C
For use in wet locaons No
Equipment mobility Built in
Operang condions Connuous
Overall size 128.0 x 102.0 x 38.1 (mm)
Weight
215 (g) 235 (g)
Marked degree of
protecon
Front panel: IP65 / Rear Case: IP20 to IEC 60529
Type 1 to UL 50E
Equipment classificaon Industrial, Professional, Commercial
Equipment class Class III
Equipment type Permanently connected, Fixed
I/O Port
Serial 1
Connector: D-Sub 9-Pin
COM1: RS-232 (TXD, RXD)
COM2: RS-422/485
COM3: RS-485
Serial 2 ---
LAN
---
10M/100M
USB
USB2.0 Type-A (Host)x1
USB2.0 Type mini-B (Device)x1
Micro SD ---
Audio
---
PLC Extension
---
Terminaon
Switch
Yes (For RS-422/485)
Power
Power Input 24VDC±20%
Consumpon 350mA@24VDC
Insulaon 50MΩ at 500VDC
Environment
Relave Humidity 10%~90%@ 40°C (non-condensing)
Withstand Voltage
AC500V/20mA/1 Min. (between charger & FG terminals)
Vibraon
5 to 9Hz Half-amplitude: 3.5mm
9 to 150 Hz Constant acceleraon: 19.6m/s2 (2G)
3 direcons of X, Y, Z: 10mes (IEC61131-2 complaints)
Noise Suppression
1000Vp-p, width 1us, rising me 1ns
Grounding Resistance
Below 100Ω
Dimension Cut-out 118.5 x 92.5 (mm)