Need help?Do you have a question about the Faulhaber 3564K024B CS and is the answer not in the manual?
Explains symbols like Warning, Caution, Regulation, and Note.
Outlines safety precautions for operation and intended use.
Details the integrated DC-Servomotor, encoder, and controller.
Describes the DSP-based Motion Controllers and their functions.
Initial steps for commissioning via serial interface and software.
Guidelines for physical installation, cooling, and wiring.
Measures for electromagnetic compatibility, including filters.
Detailed pin-out for motor and controller connections.
Wiring diagrams for RS232 communication and motor connections.
Configuration of serial communication parameters for network operation.
Initial parameter setup for motor type and operational modes.
How to preset target positions and execute positioning commands.
Methods for controlling motor speed via RS232 or analog input.
Configuration for homing sequences and limit switch inputs.
Explains modes like Stepper, Gearing, Analog Positioning, etc.
How to create and execute stored motion sequences.
Details on commutation, current control, and protection features.
Overview of commands for initial configuration and modes.
Commands for reading controller status and parameters.
Detailed commands for creating and managing sequence programs.
Default parameter settings for various controller models.
Pre-operation checks and power supply considerations.
Information on maintenance and how to resolve malfunctions.
Specifications for operating data, dimensions, and connections.
Specifications for operating data, dimensions, and connections.
Specifications for operating data, dimensions, and connections.
Overview of relevant European Community directives.
Explains EMC principles and harmonised standards.
Manufacturer's declaration of compliance with EMC directive.
Declaration regarding the Machinery Directive 98/37/EC.
Terms and conditions of the product warranty.
Comprehensive list of all commands used in the manual.
General| Diameter | 35 mm |
|---|---|
| Length | 64 mm |
| Nominal Voltage | 24 V |
| Protection Class | IP40 |
| Motor Type | Brushless DC |
To Next Page
