Why my FAURE FYAN8FW0 Refrigerator does not operate?
If your FAURE Refrigerator isn't working, first ensure it is switched on. Then, check that the mains plug is correctly connected to the mains socket. Finally, test the socket with another appliance to rule out a voltage issue. If there's no voltage, contact a qualified electrician.
Why is the temperature in my FAURE FYAN8FW0 too high or too low?
If the temperature in your FAURE Refrigerator is too low or too high, try the following: * Set a higher or lower temperature as needed. * Ensure the door is closed correctly. * Allow warm food to cool before storing it. * Avoid storing too much food at once. * Defrost the appliance if the frost is thicker than 4-5 mm. * Only open the door when necessary.
How to reduce frost and ice buildup in my FAURE FYAN8FW0?
If there is too much frost and ice in your FAURE Refrigerator, make sure the door is closed correctly. Also, inspect the gasket for any deformation or dirt. Ensure food products are properly wrapped. Check the temperature setting, and if the appliance is fully loaded and set to the lowest temperature, set a higher temperature. If the temperature set in the appliance is too low and the ambient temperature is too high, set a higher temperature.
Why does the compressor in my FAURE FYAN8FW0 Refrigerator run continually?
If the compressor in your FAURE Refrigerator is running constantly, first check the temperature setting. If many food products were put in at the same time, wait a few hours and then check the temperature again. Ensure the room temperature is not too high, allow warm food products to cool before storing them, and make sure the door is closed correctly.
General| Brand | FAURE |
|---|---|
| Model | FYAN8FW0 |
| Category | Refrigerator |
| Language | English |
To Next Page
