Favero Coin Timer 1 User Manual

Art. 178-10
ART. 178-10 CT1 Coin/token timer for 1 service
User and Installation Manual ............................................................................ 3
ART. 178-10 CT1 Temporizzatore a monete/gettoni per 1 servizio
Manuale di uso e installazione …...................................................................... 9
ART. 178-10 CT1 Temporizador de monedas-fichas para 1 servicio
Manual de uso e instalación …......................................................................... 15
ART. 178-10 CT1 Minuteur à pièces ou jetons pour 1 service
Mode d’emploi et d’installation …......................................................................
21
ART. 178-10 CT1 Münz/Wertmarken Zeitgeber für 1 Service
Gebrauchs- und Installationsanleitung .............................................................
27
FAVERO ELECTRONIC DESIGN
Pag. 1 / 32
178-10-M02 - CT1 manuale di uso e installazione
ENGLISH
ITALIANO
ESPAÑOL
FRANÇAIS
DEUTSCH

Favero Coin Timer 1 Specifications

General

Category	Timer
Manufacturer	Favero
Model	Coin Timer 1
Type	Digital Timer
Display	LCD
Power Source	Battery
Storage Temperature	-20 to 60 °C

Summary

CT1 Coin/Token Timer User and Installation Manual

1. GENERAL

Overview of the CT1 Coin/Token Timer functionality and purpose.

1.1. Symbols Used in the Manual

Explains symbols indicating important safety and usage information.

1.2. Technical Features

Details specifications like size, power, operating conditions, and relay ratings.

1.3. Guarantee

Information on the product's warranty period and post-sale support.

1.4. Safety Warning

Critical safety instructions for installation and operation by qualified technicians.

1.5. Disposal of Product

Guidance on environmentally friendly product disposal and waste collection.

1.6. Compliance with EC Regulations

Lists European directives the CT1 complies with regarding EMC and safety.

2. MOUNTING TO WALL

3. ELECTRICAL CONNECTIONS

3.1. Protection Conductor Circuit (PE) for Grounding

Instructions for connecting the grounding conductor for safety.

3.2. CT1 Power Supply Circuit

Details on connecting the power supply to the CT1 unit.

3.3. Electrical Load Connection for Different Relay Versions

How to connect the electrical load for 10A and 30A relay versions.

4. PROGRAMMING

4.1. Coin Acceptor

Information on programming the electronic coin acceptor.

4.2. Time of Service

Setting the service time using DIP-Switches.

4.3. Accumulation of Time

Activating/deactivating the time accumulation function.

4.4. Delay of Service

Setting a delay before the service starts.

4.5. End of Service Notice

Activating/deactivating end-of-service notifications.

4.6. Manual Start or Stop of Service

Using the LOAD ON/OFF button for manual control and testing.

4.7. Signal Light

Explains the conditions indicated by the CT1's red signal light.