FAVI RioHD-LED-K1 - Operating the Projector; Powering On and Off; Focus Adjustment; Source Selection

OPERATING
6
Power:
Step 1: Connect one end of the AC adapter to the projector DC
12V port and plug the other end into an electrical outlet.
Step 2: Press the POWER button on the projector or remote.
Focusing:
Manually adjust image focus by rotating
the focus ring around the projector’s lens.
WARNING: Do not stare directly into lens when adjusting focus.
Channels:
Step 1: Open the “Source Menu” by
pressing the SOURCE button
on the projector or remote.
Step 2: Continue press of the SOURCE
button will move the cursor
down the channel options.
Step 3: Press OK button on highlighted
channel will confirm your
channel.
Input Source
TV
AV
PC
HDMI
USB
SD
OK